Wire rope hydraulic universal testing machine and equipment parameters to understand
Test of hydraulic universal testing machine for metal and nonmetal tensile, compression, bending, shear and so. In order to guarantee the testing machine instructions test readings with high accuracy, the pendulum dynamometer indicating test force. Testing machine is divided into two parts: subject and dynamometer. The relative error was within ± 1% of indication of the machine. Random equipped with tensile, compression, bending and shearing and other accessories. The design and manufacture is based on the GB/T3159 - 92 "hydraulic universal testing machine". For all kinds of metal materials tensile, compression, bending and shear test, compression test of non-metallic materials can also be used as plastics, cement, concrete, adding a simple accessories, can complete the tape chain, a variety of performance testing of wire rope, welding electrodes, tile and component. This machine adopts cylinder underneath type, low height, light weight, especially suitable for engineering construction department. According to the actual needs of customers, can also choose the microcomputer control. Electronic force, liquid crystal display test force - time curve, test results, test the peak stress, yield point; convenient experimental data can be printed on the experiment results. According to customer specific requirements, test force control mode optional, optional digital display, microcomputer screen display, servo.
Parameters of hydraulic universal testing machine:
Model: WE-100B WE-300B WE-600B WE-1000B
Maximum test force: 100KN 300KN 600KN 1000KN
Range: the unclassified, equivalent to 3 Block
Force measurement range:4%-100%F.S
Relative error of indication of test force: ± 1%
Resolution: 0.1KN
Tensile space: 550mm, 700mm, 750mm
The compression space: 380mm
Clamping modes: manual clamping automatic clamping
Round specimen clamping diameter: diameter of 6-26mm, Phi 6-26mm, Phi 13-40mm, Phi 13-40mm
Flat specimen clamping thickness: 0-15mm
Flat sample maximum clamping width: 70mm
The upper and lower plates size: 160mm
The maximum distance between bending fulcrum: 450mm
Tensile space two pillar distance: 450mm
Pump motor power: 1.1kW
The beam under moving motor power: 0.75kW
Machine dimensions: 720 x 580 x 1950mm, 720 x 580 x 1950 mm, 890 × 660 × 2200 mm

Previous News：After 2012 years after the spring machine industry recruitment difficult

Next News：Accuracy of spring testing machine